10mesh stainless steel mesh material Stainless steel wire 304 SS304 is a non-magnetic stainless steel grade. Magnets will not stick to this grade of metal. This grade is the most common…
8mesh stainless steel wire mesh
8mesh stainless steel wire mesh material Stainless steel wire 304 SS304 is a non-magnetic stainless steel grade. Magnets will not stick to this grade of metal. This grade is the…
Copper Wire Mesh for Jewelry making
As the copper wire mesh is beautiful metal wire mesh, it is widely used in the jewelry designs. The material is not just visually pleasing but also versatile and easy…
Copper Mesh for Making the Mask
Phyllis J. Kuhn, Ph.D., developed the Well Mask, which is a standard face mask with a copper mesh insert. Testing shows that Kuhn’s masks kill about 90% of germs within…
Tolerances on opening for space cloth
Tolerances on opening for space cloth: The tolerance in opening of space cloth shall be in accordance with the following table Opening size tolerance table Opening Tolerance In. mm In.…
Tolerances on Woven Wire Mesh
Tolerances on Mesh—Tolerances in mesh count shall be applied separately for warp and shute and in accordance with the following table. mesh count tolerance table mesh Warp Shute Coarser than…
the wire diameter tolerance for weaving
Wire Tolerances—The wire diameter tolerance for weaving shall be in accordance with the following table. It is recognized that mechanical deformation of the wire occurs during weaving, and therefore, the diameter measured…
Woven Wire Cloth/Mesh Surface Condition
Woven Wire Cloth/Mesh Surface Condition Woven wire cloth may be covered with a film of oil or other lubricant as a result of the manufacturing process. The wire may show traces…
Woven wire mesh/cloth cut-to-size-pieces
Cut-to-Size Pieces—The tolerances that can be held on cut pieces of wire cloth can be dependent on the piece size the mesh wire diameters the type of weave These factors should be…
Woven wire cloth delivery requirements
Except when specifically agreed to otherwise, the total quantity of wire cloth furnished shall be within ±10 % of the quantity ordered. The invoice shall be based on the actual quantity furnished. Any finishing or…