The selection of the wire mesh number for a filter element depends on the desired filtration characteristics and the particle size range you want to capture. The wire mesh number is determined by the mesh count, which refers to the number of openings per linear inch.
Generally, finer wire mesh numbers correspond to a higher mesh count and smaller openings, which can capture smaller particles. Coarser wire mesh numbers have a lower mesh count and larger openings, suitable for larger particle filtration.
Here are some general guidelines regarding wire mesh numbers for filter elements:
Fine Filtration: For applications requiring fine filtration and capturing smaller particles, wire mesh numbers in the higher range are suitable. Mesh numbers such as 80, 100, 120, or even higher can provide effective filtration for fine particles.
Medium Filtration: If the filtration requirement involves a medium particle size range, wire mesh numbers in the middle range can be used. Mesh numbers around 40, 60, or 80 can provide effective filtration while maintaining sufficient flow rates.
Coarse Filtration: Coarse filtration applications that involve capturing larger particles may require wire mesh numbers in the lower range. Mesh numbers such as 10, 20, or 40 can be suitable for these applications.
It’s important to note that the selection of the wire mesh number is also influenced by other factors such as the wire diameter, weave pattern, and material used in the wire mesh. These factors collectively determine the overall filtration efficiency and flow rates of the filter element.
Additionally, it’s recommended to consider the specific requirements of your filtration application, including the desired particle size range, flow rates, pressure drop limitations, and the nature of the substances being filtered. Consulting with Ourun Wire Mesh can provide valuable insights and help you determine the most appropriate wire mesh number for your filter element based on your specific needs
