A screen mesh is installed in the extruder together with the breaker plate. It is very effective for filtration and adjusting the backpressure in the cylinder to enhance the mixing effect. The screen…
What Filter Element Specifications Work Best?
The screen diameter is dependent on the equipment you use. No matter what equipment you use, the diameter of your extruder screens will most likely is within the average diameter range of…
What Types of Extruder Screens Are Available?
There are five types of extruder screens: disk, oval, wrap, candle pack, and belt. For the common used items, it is the disk, oval, and wrap screens. The key difference between the…
Terminology of Demister Pads
Coalescence - Liquid particles in suspension that unite to create particles of a greater volume. Conventional Gas-Liquid Separator- Vertical or horizontal separators in which gas and liquid are separated by…
Mesh Filter Discs for Synthetic Fibers and Filaments
Synthetic fiber and monofilament production requires many styles of filters . Ourun Wire Mesh manufacture a full range of spin packs for synthetic fibers and filaments. Manufacturing processing We fully control…
What Types of Filter Discs are Available
We can produce an extensive range of filter discs that is welded or framed to meet the demands of many diverse industries.
What are the Types of Mesh You Will Find on Filter Discs
The common mesh types for filter discs include: Plain weave mesh Dutch weave mesh Sintered mesh Perforated mesh Etched mesh Expanded mesh Pleated mesh
Extruder Screen Components
Extruder screens are a key part of any polymer or plastics extrusion process. There are a few key components to an extruder screen that we want to cover. These components…
Extruder Screens for Blown Film Production
The extruder screens,also named as mesh filter discs or screen mesh packs, is a woven wire mesh filtration system made to meet the customer need. They are available in single-layer or multi-layer configurations, and remove impurities…
How to Make the Extruder Screen
1. choosing a wire mesh with the appropriate micron rating for the application. 2. Processing the layers of mesh together by spot welding process. 3. After spot welding, proceed to a punching process that makes use…